Posts Tagged ‘tiles’

  Grout is the white colored visible paste that keeps the tiles together. Its characteristics are quite like that of cement and being porous it tends to gather dirt and grime easily. For that reason it becomes liable to breed lots of different kinds of bacteria, mold and mildew.

So how do you keep your grout from incubating bacteria and getting dirty easily? . The answer is simple. You should seal it. .You can get it done either professionally or learn how to do it yourself. Putting on a best grout sealer on will make cleaning your tiles much easier and make your home a lot more sanitary.

Tile and grout cleaning is a very laborious and tiring job. The easiest way is to get them cleaned from a professional. If you insist on doing it yourself, here’s how to go ahead with it.

As a first step you make a mixture of water and vinegar and rinse the tiles with that. In most of the cases it may suffice to do just that.Next you make a paste out of equal amounts of salt and baking soda with a little bit of water. That is your grout cleaning mix. Use a soft scrubber or a brush to scrub the grout till its clean. Now rinse with water or a wet sponge and using a towel dry it thoroughly.

Stained tile may be treated with lemon juice or bleach to restore the normal white color of the grout. Wait for about ten to fifteen minutes for the juice to get soaked and then wipe off. Be careful to properly dilute the bleach and never mix the bleach with any other chemicals. Wear gloves and glasses if they are available.

The other ways of best grout cleaning involve the use of steam cleaner or pressure washer . Steam cleaners are generally used for interiors whereas for outdoors a pressure washer is often used. Both the tools give very good results.

Tile is a popular flooring choice due to the ease of care, beauty and durability. When compared to carpets, tiles are more resistive and much easier to clean, but they also have their small problems that we must take care of. The bad news is, our tiles are able to build up the dirt as well as grime which is making our floor to look dirty, old and not quite pretty to look at. Worse, dirty tile and grout is almost impossible to hide making it an eye-sore for homeowners and guests. Read and learn how can you stop those common problems before they even appear with some easy solutions that will keep your home looking the best way possible.

Common Tile and Grout Problems

Broken or Cracked Tile.

If there were some air pockets present during the tile installation or you dropped some items on the floor, then it is possible that you have some small cracks on your floor. Even those cracks that look fine and have very small cracks need our attention and that we seal grout properly.

Dull Flat Tile.

The finish on any flooring can become dull and tile is no exception. Whether glossy or flat finished, dirt and scratches can leave your tile looking old and dull instead of the clean fresh look it had when newly installed.

Dirty Grout.

The biggest problems that occur with tiles are unsightly stains and dirty grout.

What was done in the past is the removal of old grout and installing completely new one, which was hard, dirty and expensive work. Since we are able to use better techniques and employ better grout care, it is easy to restore the looks and clean grout to make it look much better.

Unlike casual carpet cleaning, few homeowners are anxious to tackle a tile and grout cleaning job and with good reason, it’s hard work! I know it is hard to select a good company to do some work for you, and when it comes to tile and grout, that is even more difficult task.

We all know that not all companies are the same, so you better find a company that can do this job right and that has a nationwide reputation. They hae reliable guarantee, license, have insured staff and are bonded.